Tataiso bakeng sa tšebeliso
Tlosa lerōle, oli le metsi holim'a li-substrates.
Kopo tikoloho mocheso 5 ~ 35 ℃, mongobo 50 ~ 70% RH. Ha mocheso o ka tlase ho 5 ℃, o khothalelitsoe lihlahisoa tsa sebaka sebakeng sa 30 ~ 40 ℃ bakeng sa 1H (Ha ho ho feta 3H).
Bakeng sa mokhoa oa Kaho, ka kopo sheba tlhaloso ea kaho ea JUNBOND kapa ikopanye le basebetsi ba tekheniki.
Pente e tlameha ho lekoa ho lumellana pele ho penta.
Activator le primer ha li hlokehe.
Likaroloana
- Karolo e le 'ngoe, thixotropy e babatsehang, e bonolo bakeng sa kopo.Boemo bo phahameng.
- Ts'ebetso e ntle ea ho tiisa ka kelello, khalase le mefuta e mengata ea lipente.
- Ts'ebetso e ntle haholo ea ho tiisa le momahano, e tenyetseha ebile e tšoarella ha ho tiisoa.
Ho paka
- Khatriji: 310ml
- Boroso: 400ml le 600ml
- Moqomo: lilithara tse 5 (24kgs) le lilithara tse 55 (240kgs)
Storage le shelf phela
- Lipalangoang: Beha sehlahisoa se tiisitsoeng hole le mongobo, letsatsi, mocheso o phahameng 'me u qobe ho thulana.
- Polokelo: Lula u tiisitsoe sebakeng se phodileng, se omileng.
- Mocheso oa polokelo: 5 ~ 25 ℃. Mongobo: ≤50% RH.
- Cartridge le boroso khoeli ea 9, Pail 6 khoeli.
Mmala
● Bosoeu / botšo / bohlooho / moreki oa hlokahala
E loketse ho tiisa pakeng tsa khalase e ka lehlakoreng le likarolo tse kholo tsa likoloi, libese tsa terene le likepe. Ho tiisa bakeng sa letlalo la letlalo la koloi le gusset ea aluminium. Ho tiisa bakeng sa mekhabiso ea ka hare le ka ntle.
| JB20 |
| Lintho | Thepa |
| Ponahalo | Setlolo se tšoeu, sa Gery homogeneous |
| Sagging thepa(mm) GB/T 13477.6 | 0 |
| Nka nako ea mahala②(min) GB/T 13477.5 | 35, hoo e ka bang. |
| Lebelo la ho folisa(mm/d) HG/T 4363 | 3.2, hoo e ka bang. |
| Likahare tse sa fetoheng (%) GB/T 2793 | 97, hoo e ka bang. |
| Shore A-hardness GB/T 531.1 | 55, hoo e ka bang. |
| Tensile matla(MPa) GB/T 528 | 2.5, hoo e ka bang. |
| Elongation nakong ea khefu(%) GB/T 528 | 600, hoo e ka bang. |
| Thempereichara ea ho sebetsa (℃) | -40-90 |
